10" or 12" Single  or dual Subwoofer Vented Speaker Box  only $39.00

10" Single Probend Technology Subwoofer Box With Dual Ports & Curved Plexiglass only $69.00

MDF construction. Completely carpeted enclosure.  Screwed down terminal cups. Completely glued & braced. 10" single enclosure. $45.00

JL AUDIO 12W3V3-4
Technical Specification

* Sensitivity: 87.15 dB
* RMS Power Range : 75-300 Watts
* Peak Power Handling: 650 Watts
* Impedance: 2 Ohm
* Diameter: 12 Inch

Features

* DMA-optimized, long linear excursion capability to virtually eliminate distortion and increase sound output
* Perform outstanding in compact sealed or ported enclosures
* DMA (Dynamic Motor Analysis) modeling to deliver unsurpassed dynamic stability and low-distortion operation within intended power range
* Mineral-filled polypropylene upper cone with a metallic JL Audio medallion logo gives the W3's a whole new, classy and sophisticated look
* Vented Reinforcement Collar
* Insert Molded Suspension / Coil / Terminal Sub-Assembly
* Customizable Trim Ring
* Elevated Frame-Cooling
* Floating Cone Attach Method
* Surround Stress-Relief
* Free Air Resonance (Fs): 26.72 Hz
* Electrical "Q" (Qes): 0.472
* Mechanical "Q" (Qms): 7.572
* Total Speaker "Q" (Qts): 0.444
* Equivalent Compliance (Vas): 2.844 cu. ft. / 80.54 liters
* One-Way, Linear Excursion (Xmax): 0.510 in. / 13.0 mm
* Reference Efficiency (no): 0.313%
* Efficiency (1W/1m): 87.15 dB SPL
* Effective Piston Area (Sd): 80.600 sq. in. / 0.0520 sq. m.
* DC Resistance (Re): 3.563 ohm
* Nominal Impedance (Znom): 4 ohm
* Thermal Power Handling (Pt): 300W
* Driver Displacement: 0.071 cu. ft. / 2.01 liters
* Net Weight: 14.50 lbs. / 6.58 kg

was $199.00EA.   (sale priced)  $169.00ea.

The JL 12W7 is an incredible subwoofer created by one of the premier car audio companies, JL Audio. The 12W7 uses six patented JL Audio technologies to put this woofer among the top of its class. It uses an exclusive floating cone attach method to keep the voice coil secure and firm. The plateau-reinforced spider is tested to withstand a lot of use and will ensure that your woofer lasts a long time. This subwoofer isn't a short term investment. The 12w7 will provide you great bass and fantastic sound quality for years to come. JL's unique OverRoll foam surround allows for some intense excursion and a high Xmax. With 1,000 watts of power running through this subwoofer, you are going to be experiencing a whole new world of bass. Distortion is reduced with the help of W-Cone technology. If you have never heard the 12W7 before, get ready to take your car audio system to the next level!

• 12" Single 3 ohm W7 Series Subwoofer
• Power Handling:
  • Peak: 2000 watts
  • RMS: 1000 watts
• Impedance: Single 3 ohm
• OverRoll surround
• W-Cone
• Floating-cone attach method
• Plateau-reinforced spider attachment
• Radially cross-drilled pole piece
• Massive forced-air-cooled aluminum alloy frame
• Highly Linear, DMA-Optimized motor system
• Huge diameter, progressive roll spider
• Co-extruded double lead wires
• Ultra-long voice coil
• WAS $699.00   NOW ONLY $499.00  (1 LEFT IN STOCK AT THIS PRICE)

                                                                                 JLAUDIO 12W1V2

The affordable W1v2 subwoofer incorporates patented features developed by JL Audio for their legendary W7 subs. Special venting keeps the W1v2 sub running cool for trouble-free performance, while extensive research in cone bonding and motor assembly construction keeps its cone movement linear for precise, dependable output. The cone interlocks with the dust cap for superior rigidity, and a sophisticated suspension system keeps internal parts aligned properly.

The low-profile 10W1v2-4 10" subwoofer works best in compact enclosures, so you can put quality lows in smaller and hard-to-fit vehicles. It features a metallic-finish polypropylene cone with an embossed JL Audio logo for a look that stands out as much as the sound. The removable, customizable trim ring lets you put a personal touch on your system, and makes optional grille installation a snap. This punchy W1v2 sub works well with moderate power, delivering impressive performance without costing a fortune.

Details:

·        10" 4-ohm subwoofer

·        metallic-finish polypropylene cone with nitrile-butylene rubber surround

·        power range: 50-150 watts RMS

·        peak power handling: 300 watts

·        frequency response: 25-250 Hz

·        sensitivity: 84.53 dB

·        top-mount depth: 4-7/16"

·        sealed box volume: 0.625 cubic feet 

·        ported box volume: 1.0 cubic foot          WAS $129.00 NOW ONLY  $99.00

                            ROCKFORD FOSGATE P3D412 SUBWOOFER

* Custom 10-AWG nickel plated push terminals * Dual linear spider w/embedded 16 AWG tinsel leads * Extended pole piece & bumped backplate * High excursion Poly-ether-ester surround * High-temp voice coil w/spun-laced Nomex re-inforcement collar * Kevlar Fiber reinforced semi-pressed paper cone & ABS/Acrylic dustcap * Protective PVC textured magnet cover * Reversable diamond cut cast aluminum trim ring * Vented spider cavity * Value * CEA-2031 Compliant * Size 12" * Impedance 4-Ohm x 2 * Power Handling 500 Watts RMS * 1000 Watts Max * Sensitivity 85 dB * Motor Size 102 oz. double stacked * Voice Coil Diameter 2.5" 4-Layer: (6.35 cm) * Speaker Connector Dual 10 AWG compression * Mounting Depth 6.75" * (17.15 cm) * Rec. Sealed Enclosure 1.0 cu. ft. (28.88 liters) * Range: 0.75 cu. ft.- 1.25 cu. ft. * Range: (21.24 liters - 35.40 liters) * Rec. Vented Enclosure 1.79 cu. ft. (50.69 liters) * Tuning Frequency (vented) 40 Hz * Port: (1) 4" diam. x 10" long * Port: (1) 10.16 cm x 35.56 cm * Shipping Weight 25.60 Lbs.: (11.61 Kg.)  WAS $249.00 ea.   Now Only $169.00 ea.

KICKER COMPVR10